KAD/ADC/126
4 channel Accelerometer ADC
The KAD/ADC/126 is used to condition and digitize up to four Single-ended (S/E) analog channels. All of these channels have a constant current source and high-pass (DC-reject) filter for use with integrated charge-amp piezoelectric (ICP) accelerometer devices.
At the heart of the KAD/ADC/126 is a hard-wired state-machine that over-samples all channels at a rate between 200 ksps and 400 ksps and digitally filters any noise above the user-programmable cutoff frequency.
This is achieved using cascaded, half-band, Finite-Impulse-Response (FIR) filters followed by an 8th order Butterworth IIR filter with a default cutoff point set at one-quarter of the sampling frequency (fc = fs/4).
All signals are sampled simultaneously (isochronously). Thus, when several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels will be aligned.
- Key Features
- Applications
- Specifications
- Related Products
- Four accelerometer input channels with Dc reject
- Programmable input range (±1V, ±10V)
- High accuracy (gain error of 0.1% FSR typical at 10kHz)
- Constant current source excitation on each channel (3.6mA typical)
- Short on any channel does not affect others
- 16-bit simultaneous sampling on each channel
- Up to 100 k samples per second per channel
- Up to 25 kHz Bandwidth (AAAF filter)
- Accelerometer signal conditioning and digitalization
- Suitable for ICP, Isotron, Piezotron and Deltatron sensors
KAD/ADC/126
4 channel Accelerometer ADC
The KAD/ADC/126 is used to condition and digitize up to four Single-ended (S/E) analog channels.