The KAD/BCU/140/D is a key Acra KAM-500 module, which acts as a backplane controller, KAM-500 system programmer, and optionally as a PTP client or PTP Grandmaster.
This paper is divided into the following sections:
- “63.1 Overview” on page 1
- “63.2 Setting up the KAD/BCU/140/D in DAS Studio 3” on page 1
- “63.3 Setting an IP address in DAS Studio 3” on page 10
- “63.4 System synchronization” on page 11
- “63.5 Aperiodic transmission” on page 12
- “63.6 Applications” on page 13
- “63.7 FAQ, Common problems, and troubleshooting guide” on page 20
- “63.8 Related documentation and support” on page 2