KAD/UBM/106 RS-232, RS-422 or RS-485 serial bus snarfer - 16ch

The APCM-404A is used to encode data in an IRIG-106 Chapter 4 (Ch.4) PCM stream.

The AEXT-401A is an extender card, which allows modules contained in an Axonite (AITE-401A) remote housing to connect to an ADAU chassis.

The ASCD-424A is used to condition and digitize up to 24 analog differential-ended channels. Single ended configurations are possible by enabling programmable pull-down resistors on any of the negative inputs.

The ADAU-2016 is an Axon Family ADAU chassis with an integrated, isolated 100W PSU, slots for up to 16 ADAU user-modules and a separate slot for an Overhead module.

Full/½ bridge ADC (voltage/current excitation, programmable analog gain, balance and classic shunt) 12ch at 25 ksps

The ETG-302-1 is a two-channel optical 10 Gigabit Ethernet board for the next generation Airborne Instrumentation Multiplexer, AIM-200XE-1.

KAD/FBM/103 FireWire S200b bus monitor parser - 1ch

KAD/MBM/101 Dual redundant MIL-STD-1553 bus monitor with parser-packetizer

KAD/MDC/002 Multiplexing ADC (programmable analog gain, pressure scanner, external temp. compensation) - 2ch at 12.5ksps

KAD/SDI/103 Serial data bus parser - 1ch

KAD/SWI/107 Ethernet tap module 4-port